HYGIENE STATIONS SPG 1010 S

The INOX TIME company produces INOX CLEAN sanitary checkpoints of the  pass - through type with a module for disinfection of hands and shoe soles. Manufactured from AISI 304 stainless steel.

Standard complete set:

- programmable controller;

- sealed photocells;

- indicators of the disinfection cycle;

- restrictive handrail;

- reinforced turnstile;

- disinfecting passage;

- stationary tank for the disinfectant;

Disinfection of shoe soles.

Consists of two sections: a section with a disinfectant liquid and a section for removing excess liquid from shoes. The worker walks through a special tank with a disinfectant solution, the level of which is just above the level of the floor grate. The disinfectant solution is topped up manually. In the section under the turnstile, excess liquid from the shoes flows into a special compartment.

Disinfection of the hands.

Hand disinfection occurs when the hands are in the disinfection chambers (by triggering touch sensors). The turnstile opens only after the disinfection cycle is completed.

Turnstile operating modes.

The rotating turnstile provides passage through the sanitary inspection room only in case of disinfection of hands and shoe soles. Otherwise, the turnstile is blocked. Bilateral rotation of the turnstile (entrance and exit from the production area; when leaving the production area, the turnstile is unlocked by a photosensor, hand disinfection is not required).

The sanitary inspection is equipped with a system of  "emergency unlocking" of the turnstile  (anti - panic) - in case of an emergency power outage, the turnstile is automatically unlocked for unhindered emergency evacuation of employees.